Navigate Up
Sign In
district,http://rss.blackboardconnect.com/167340/cccalert/feed.xml;washington,http://rss.blackboardconnect.com/167340/cccalerthw/feed.xml;truman,http://rss.blackboardconnect.com/167340/cccalerttr/feed.xml;daley,http://rss.blackboardconnect.com/167340/cccalertda/feed.xml;olive-harvey,http://rss.blackboardconnect.com/167340/cccalertoh/feed.xml;kennedy,http://rss.blackboardconnect.com/167340/cccalertkk/feed.xml;wright,http://rss.blackboardconnect.com/167340/cccalertwr/feed.xml;malcolm-x,http://rss.blackboardconnect.com/167340/cccalertmx/feed.xml

Quality Assurance Basic Certificate

Manufacturing Quality Assurance

Basic Certificate (BC)

View the Semester Map for Quality Assurance Basic Certificate

Details: Basic Certificate (BC)

Credit Hours (CH)

Program/Plan Number

729

Funding Options

Open For Enrollment

Yes

Also Offered At

 

Courses

+-

Prerequisites

 CH

General Education Requirements

4  CH
Mathematics
MATH 125-1
Introductory Statistics 4
Basic descriptive statistics including frequency distributions, mode, mean and standard deviation. Permutations, combinations, probability rules and Bayes Theorem. Binomial and normal distributions. Basic inferential statistics including sampling theory, confidence intervals for means and proportions, test of hypotheses. Chi-square distribution. Introduction to correlation and regression. Includes at least one hour per week using computers in statistical application. Writing assignments, as appropriate to the discipline, are part of the course.
Prerequisites:Grade of C or better in Math 99; or COMPASS PRE-ALGEBRA (17-99), ALGEBRA (43-99), and College ALGEBRA (1-50); or ACT Math (min. 21); or SAT Math (min. 500); or ALGEBRA Placement Test Waiver, or Consent of Department Chairperson.
IAI Approved
Offered at: Harold Washington Harry S Truman Kennedy-King Malcolm X Olive-Harvey Richard J. Daley Wilbur Wright

Program Core Requirements

12  CH
Manufacturing Tech TC1
340MFGT 104
Statistical Process Control 3
This course introduces the use of statistical process control (SPC) which ensures that production systems maintain quality through predictive control of variations. Various distribution curves and statistical control charts are introduced through specific production problems. The interpretation and use of process and product control data is presented through simulations of real scenarios. The course will also prepare students for the Manufacturing Skill Standards Council's Quality Practices and Measurement exam. Writing assignments, as appropriate to the discipline, are part of the course.
Prerequisites:Grade of C or better in 340MFGT 139, AND Grade of C or better or concurrent enrollment in Math 125; OR Consent of Department Chairperson.
Offered at: Richard J. Daley
340MFGT 139
Print Requirements-Quality Assurance 3
This course focuses on the fundamentals of print reading and the measuring skills needed to verify print requirements. VisualIzation of 3D objects from orthographic views and the use of micrometers and dial calipers are stressed. The concepts of Geometric Dimensioning and Tolerancing, and quality tools (such as Pareto diagrams and fishbone charts) are introduced. Writing assignments, as appropriate to the discipline, are part of the course.
Prerequisites:Eligibility for Math 98 and Reading 99 OR Consent of Department Chairperson.
Offered at: Richard J. Daley
340MFGT 142
Geometric Dimensioning and Tolerancing 3
This course expands upon the student's basic knowledge of mechanical drawings by adding form and feature controls in order to meet assembly requirements at the lowest cost. The differences between traditional dimensioning and geometric dimensioning will be stressed. This course prepares students for an ASME certification in GDT. Writing assignments, as appropriate to the discipline, are part of the course.
Prerequisites:Grade of C or better in 340MFGT 139 OR Consent of Department Chairperson.
Offered at: Richard J. Daley
340MFGT 143
Advanced Metrology 3
The course focuses on the use of the Coordinate Measuring Machine (CMM) and the optical comparator to inspect machine parts to the current ASME Y 14.5 Geometric Dimensioning and Tolerancing (GD&T) standards. Lab exercises will focus on the set up and operation of precision measuring tools, including the CMM and the optical comparator, to inspect complex parts. Bore gages, attribute gages, gage blocks and pins and their use in calibration will also be covered. Writing assignments, as appropriate to the discipline, are part of the course.
Prerequisites:Grade of C or better OR Concurrent enrollment in 340MFGT 142 OR Consent of Department Chairperson.
Offered at: Richard J. Daley

Additional Requirements

 CH

Elective Program Requirements

 CH

Area of Focus

 CH

Focus Electives

 CH

 CH
Total Minimum Credit Hours
 

Career Pathways

Manufacturing Advanced Manufacturing

See Also

Related Programs In:

Publications

Accreditation Disclaimer